Plan Description
A 40.5" wingspan Control-Line sports Aerobatic Delta designed by Don Lewis & Mick Devine for use with 0.40 cu.in. engines. All-balsa construction, and basic building instructions are printed on the single sheet plan
Delta V | |
MODEL TYPE | Aerobatic Control Line |
DESIGNERS | Don Lewis & Mick Devine |
POWER TYPE | IC |
POWER SIZE | 0.40 cu.in. |
CONTROL | Control Line |
WINGSPAN | 1022mm (40.5") |
PLAN SIZE | 830mm x 585mm |
NUMBER OF SHEETS | 1 |
SHIPPING WEIGHT (Printed) | 0.25kg |
Additional information, user comments and reviews
PART OF BUILDING INSTRUCTIONS PRINTED ON PLAN:
1. Join six pieces of 4" wide 2/8" sheet as shown
2. Mark out and cut off at L.E. line
3. Cut out ribs and end pieces
4. Cut out 1/8" ply plate and glue in place
5. Add spars, ribs and sides, keeping the base flat!
6. Cut out F1 with bearer slots spaced to suit your engine, then glue (epoxy) to ply plate
7. Dry-assemble leadouts and bellcranks prior to gluing leadout block on to leading edge
8. Add leading edge and lastly top sheeting
1. Join six pieces of 4" wide 2/8" sheet as shown
2. Mark out and cut off at L.E. line
3. Cut out ribs and end pieces
4. Cut out 1/8" ply plate and glue in place
5. Add spars, ribs and sides, keeping the base flat!
6. Cut out F1 with bearer slots spaced to suit your engine, then glue (epoxy) to ply plate
7. Dry-assemble leadouts and bellcranks prior to gluing leadout block on to leading edge
8. Add leading edge and lastly top sheeting